Copper Lugs w/ Heat Shrink. Amp Inputs w/ Heat Shrink.SMD CC1 Steve Meade Crossover Calibrator CC-1 Car Audio Amp Signal Cross Over. THE PURPOSE AND BENEFIT OF THE D'AMORE ENGINEERING / SMD CROSSOVER CALIBRATOR. ######xA0;have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a######xA0; power. ######xA0;source for a few reasons.
Isolating the CC-1 from the vehicle's electrical system for######xA0;power, guarantees that it will only measure what it is supposed to measure; the audio signal, not######xA0. ######xA0;in the charging system. Connector for a few reasons. It makes it pretty easy to measure the output of a headunit directly, if you choose to do so. Should the harness become damaged it is easily replaceable or repairable in the field.Everyone hides these in the back of the book. We are proud of our specs, they aren't lies, so we are putting them up front.
The Crossover Calibrator's circuitry is digital microprocessor controlled. Crossover -3dB point accuracy +/- 0.25dB. Low Battery LED trigger battery voltage. Auto-shut off timer 8 - 10 minutes after ON button is pressed. SMD IM-SG+ (Impedance Meter / Signal Generator PLUS).
SMD AMM-1 Steve Meade Audio Multimeter AMM1 Car Audio Amp Clamp. SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator. SMD DD1 Steve Meade Distortion Detector DD-1 Car Audio Amp Signal Test Tone CD. Sky High Car Audio specializes in the sales and distribution of high end car audio and car audio related products.
We are authorized dealers for all companies listed below and are growing daily. If you don't see what you need here please message us and one of our customer service representatives will be more than happy to point you in the right direction. If we can link this to our feedback and ratings that would be better! Here at Sky High Car Audio we want to help our customers as much as possible and with that being said we offer a 30 Day Free Return on all products.
After the 30 days is up we will accept exchanges on 100% Brand new in box items up to 60 days. Items must be brand new in box with zero damage or they will not be accepted. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item "SMD CC1 Steve Meade Crossover Calibrator CC-1 Car Audio Amp Signal Cross Over" is in sale since Wednesday, May 16, 2018. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Other Car Audio".The seller is "skyhighcaraudiocable" and is located in Sparks, Nevada. This item can be shipped to United States, Canada, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Chile, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.