Enter the all-new Incriminator Audio 30.1 Reserve. Well Reserve is not only in regards to the excessive power it has in Reserve with its 4000 watts rms at 1 ohm mono, or that the IA 30.1 is Reserved for only the most special of subwoofer installs, but also you do not have to Reserve a huge amount of space for that huge amount of power. What makes this IA 30.1 Reserve as one to be labeled Reserve? Let's begin with the patent pending SplitForce Technology that was introduced in latest IA 40.1, that cuts the amplifier length in half by placing the power supply section on one board, and the audio component section on a second board in a vertically stacked configuration using linking cables internally. This not only adds in conserving space and amount of heat sink material, but it also aids in cooling.
Speaking of cooling, the IA 30.1 Reserve has 3, yes 3 cooling fans to keep the air flowing and the heat under control. If you are worried about needing to strap or link a second IA 30.1 Reserve with this new style of layout, don't worry, the IA 30.1 Reserve is only 2 higher than the IA 20.1, so you have more end plate space for more features like strapping that would unleash a whopping 8000 watts at 2 ohm mono. Like the other big time IA mono block amplifiers, the IA 30.1 Reserve has a dual MOS-FET PWM power supply, and is stable up to 15.5 volt systems, along with DUAL power and ground inputs, and 4 AWG speaker wire connections. A killer feature that really sets the IA 30.1 Reserve apart, is the input voltage display right on the side of the amplifier. It adds yet another level of protection to the already stout multi-layer protection circuitry, as well as the proprietary IA heat sink, high tolerance internal electrical components, and heavy duty double sided epoxy PCB.
Make the right choice the first time, and don't use a lesser quality amplifier that will struggle to deliver power and put up with all your demands, make sure you have power in Reserve with the IA 30.1 Reserve. Digital Class-D Linkable Mono Block Amplifier. Dual MOS-FET Pulse Width Modulation Power Supply. 1 Ohm Stable Topology / 15.5 Volt Stable. Input Voltage Display / REM-I Remote Indicator Status.Heavy Duty 3 Oz Copper Layer Double Sided Epoxy PCB. Extremely High Tolerance Electrical Components For Reliability.
Proprietary Custom Tooled Heatsink with Onboard PCB Support For Vibration Resistance. High End Silver Tiffany RCA Inputs with Metal Potentiometers. Segmented Black Molded Oversized 1/0 Power and Ground Inputs. Advanced Strapping with Mirror Technology. Multi-Layer Bullet Proof Protection Circuit.
Remote Bass/Gain with Clipping Indicator. Rated Power (14.4V at 1% THD). RMS Power - 2 Ohm Linked: 8000W. RMS Power - 1 Ohm Mono: 4000W. RMS Power - 2 Ohm Mono: 2000W.
RMS Power - 4 Ohm Mono: 1000W. Frequency Response (+/- 1dB): 15Hz - 270Hz. Bass Boost (45Hz): 0 - 9dB. Input Sensitivity (Volt +/- 5%): 6.0V - 0.2V.Signal / Noise Ratio: 95dB. Dampening Factor (1 Ohm): 350 +.
Power Efficiency (4 Ohm): 85%. Power Input Connection: 1/0 Gauge. Operation Voltage: 8.5V - 16.0V. Speaker Output Connection: 4 Gauge.Dimensions (Inches): 10.63" W x 5.11" H x 11.81 L. You will be issued a Return Authorization Number. In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product. The item "INCRIMINATOR AUDIO IA30.1 MONOBLOCK 4000W RMS SUBWOOFERS BASS CLASS D AMPLIFIER" is in sale since Wednesday, January 4, 2012. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers". The seller is "woofersetc_outlet" and is located in Los Angeles, California. This item can be shipped worldwide.